Mango Butter Soap Recipe (2024)

A recipe for cold process soap using mango butter: rich and nourishing, this soap is great for hands or for the shower.

Mango Butter Soap Recipe (1)

Table of contents

  • ❤️ Why you’ll love this recipe
  • 🧂 Ingredients
  • 🥣 Equipment
  • 🍴Instructions
  • 🥫 Storage instructions
  • 🔍 FAQs
  • 👩🏻‍🍳 Expert tips
  • 🍽 Serve it with
  • 🍅 make it along with me
  • 📖 Here’s the recipe

❤️ Why you’ll love this recipe

As great as it sounds. Seriously, who can resist something called MANGO BUTTER? It’s just delightful sounding. Luckily, it is also one of the greatest soap ingredients of all time. It is super moisturizing but doesn’t soften the bar since it is a very hard butter. It is quite expensive as far as soap ingredients go, but a little has a big impact. This recipe pairs it with avocado oil to keep with the tropical theme. I wanted to keep this recipe beginner-friendly so it is mostly palm, coconut, and olive oil. I added my favorite fruity fragrance oil, Mango Mango, because, obviously. This is a great hand soap because it is hard, very cleansing, but not drying at all. If you are interested in soap making this would be a great starting point.

Beginner-friendly. This recipe is definitely suitable for beginning soap makers. The process is the same for any soap, but this one does not have too many oils in it (not that it is hard to measure oil, it’s just that the simpler the better when you are just starting out.). I do have a super simple tutorial for a cleaning soap using only one oil, but this one is WAY more fun.

You will love the finished bar with this recipe.

🧂 Ingredients

This is an overview of the ingredients. You’ll find the full measurements and instructions in the printable recipe at the bottom of the page.

You’ll need the following for this mango butter soap:

  • mango butter
  • avocado oil
  • olive oil
  • lye
  • water
  • Mango fragrance oil (optional)

🥣 Equipment

  • digital scale
  • containers
  • large pot
  • stick blender

🍴Instructions

  1. Using a digital scale, weigh your water and lye in separate containers. Add the lye to the water (SNOW FLOATS ON THE LAKE), and stir until dissolved. It will shoot up in temperature. Set your lye water in a safe place, marked as poison.
  2. Using your digital scale, weigh your oils and butter and put them in a large pot. Melt over low heat until they reach 140 degrees.
  3. Allow your lye water and oils to cool to 100-120 degrees. They should be within ten degrees of each other.
  4. Prepare your mold, color, and fragrance before blending. When you are ready, pour your lye water into your oil pot and blend using a stick blender. You are looking for “trace”, which means your ingredients have combined into a soap batter. You will see no visible oil spots, the mixture will appear somewhat opaque, and if you lift your stick blender, a trail of batter will sit on top of the liquid instead of immediately sinking in. When the trace is reached, stop blending.
  5. Mix in any color you would like to add and stir by hand. Add fragrance last as it will cause the soap to set up quickly. Add one tablespoon at a time and stir by hand after each addition.
  6. Quickly pour it into your mold. Spray with rubbing alcohol to prevent soda ash, if desired. Place in a turned-off oven and allow to cure overnight.
  7. When soap is finished curing, it will not give off any heat. Unmold, cut into bars, and allow to finish curing in layers of newspaper, turning occasionally, for three weeks.
Mango Butter Soap Recipe (2)

🥫 Storage instructions

You can store this mango butter soap in storage containers in a cool place away from humidity and sunlight after curing.

🔍 FAQs

Can I make soap without using lye?

No. If it does not contain lye, it is not soap.

Can I double a soap-making recipe?

As long the recipe is accurate, you can certainly double it. Refer to the percentages that I provided below if you want to resize the recipe.

👩🏻‍🍳 Expert tips

  • Working with soap can be dangerous and even deadly if you don’t take the necessary precautions. Make sure to wear gloves and protective eye gear at all times, as any contact could lead to significant burns on your skin and damage your eyes. Additionally, make sure you’re working in an adequately ventilated area because the fumes can be rather toxic.
  • When you’re in a hurry or under a lot of stress, don’t try to make soap. You’re more likely to make mistakes, and they are difficult to fix afterward.

If you would like to resize this recipe using a soap calculator, here are the percentages:

  • Avocado oil: 10%
  • Mango Butter: 10%
  • Olive Oil: 25%
  • Palm Oil: 27.5%
  • Coconut Oil: 27.5%

📘 Related Recipes

  • The Best Cold Process Soap Recipe
  • Lemon Soap Recipe
  • Homemade Cleaning Soap
  • Homemade Lemon Soap Recipe

🍽 Serve it with

🍅 make it along with me

Follow along step by step. The slides will turn every 7 seconds, or you can click ahead.

📖 Here’s the recipe

Here’s the recipe and video

Mango Butter Soap Recipe (3)

Mango Butter Soap Recipe

Cold process soap recipe using mango butter for extra moisture

Prep Time 1 hour hour

cure time 2 days days

Total Time 2 days days 1 hour hour

Equipment

Ingredients

  • 4.94 ounces lye
  • 9-12 ounces water
  • 3.5 ounces avocado oil
  • 9.625 ounces coconut oil
  • 9.625 ounces palm oil
  • 8.75 ounces olive oil
  • 3.5 ounces mango butter
  • 3 tablespoons mango mango fragrance oil

Instructions

  • Using a digital scale, weigh your water and lye in separate containers. Add the lye to the water (SNOW FLOATS ON THE LAKE), and stir until dissolved. It will shoot up in temperature. Set your lye water in a safe place, marked as poison.

  • Using your digital scale, weigh your oils and butters and put them in a large pot. Melt over low heat until they reach 140 degrees.

  • Allow you lye water and oils to cool to 100-120 degrees. They should be within ten degrees of each other.

  • Prepare your mold, color, and fragrance before blending. When you are ready, pour your lye water into your oil pot and blend using a stick blender. You are looking for “trace”, which means your ingredients have combined into a soap batter. You will see no visible oil spots, the mixture will appear somewhat opaque, and if you lift your stick blender, a trail of batter will sit on top of the liquid instead of immediately sinking in. When trace is reached, stop blending.

  • Mix in any color you would like to add and stir by hand. Add fragrance last as it will cause the soap to set up quickly. Add one tablespoon at a time and stir by hand after each addition.

  • Quickly pour into your mold. Spray with rubbing alcohol to prevent soda ash, if desired. Place in turned-off oven and allow to cure overnight.

  • When soap is finished curing, it will not given off any heat. Unmold, cut into bars, and allow to finishing curing in layers of newspaper, turning occasionally, for three weeks.

Mango Butter Soap Recipe (2024)
Top Articles
Latest Posts
Article information

Author: Tyson Zemlak

Last Updated:

Views: 6001

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Tyson Zemlak

Birthday: 1992-03-17

Address: Apt. 662 96191 Quigley Dam, Kubview, MA 42013

Phone: +441678032891

Job: Community-Services Orchestrator

Hobby: Coffee roasting, Calligraphy, Metalworking, Fashion, Vehicle restoration, Shopping, Photography

Introduction: My name is Tyson Zemlak, I am a excited, light, sparkling, super, open, fair, magnificent person who loves writing and wants to share my knowledge and understanding with you.